Monday, 10 December 2018

How to Import a model from CATIA V5 to ANSYS Workbench 15.0?

How to Import a model from CATIA V5 to ANSYS Workbench 15.0?

Import a model from CATIA V5 to ANSYS Workbench 15.0: CATIA and ANSYS are the two biggest software in the field of design and analysis.CATIA can be used in the high-end applications like Aerospace whereas  ANSYS can be used for perfect analysis of a part or product. In this article, I am going to explain How to Import a model from CATIA V5 to ANSYS Workbench 15.0.



A step by step procedure is to be adopted to Import a model from CATIA V5 to ANSYS Workbench 15.0 and is as follows.

Import a model from CATIA V5 to ANSYS Workbench 15.0-Procedure:

  • To import a file from CATIA to ANSYS Workbench, the model is to be prepared in CATIA  so as to analyze it in ANSYS Workbench
  • The file is to be saved in .igs format.
  • Now it is to be imported from the workbench.
  • Click on the Generate button.
  • The model is to mesh now so that the model is to be divided into a number of partitions.
  • Whenever the load is applied on the model, the load is divided by the number of partitions so as to get the uniform load on the system.
  • loads are applied to get the deformation of the model.
  • The material is to be checked for deformations.
  • If the stress developed in the material is less than the yield point then it is of safe. If it is of vice-versa then we have to optimize it to bear the maximum load.
Read:

0 comments:

Post a Comment